You want carefree driving pleasure? Then you need a battery that will not let you down. At JMT reliability is a top priority: Order the new lithium-ion battery including charger now!

DESCRIPTION:
The JMT lithium-ion battery was developed especially for all Harleys with V2 Twin engine and you can see that. It is not only particularly vibration-resistant, but also offers the ideal look with its special black, roughened surface.
Due to the high energy density the battery is very compact and surprisingly light. In fact, the battery weighs 2/3 times less than a conventional lead acid battery. Replacing a lead-acid battery with a lithium-ion battery can save up to 5kg in weight. And that with the same or even more power!
And even during longer breaks in driving (e.g. in winter) you don't have to worry about your battery. The self-discharge of the JMT lithium-ion battery is so low - maximum 5% per month! - that you can start driving again immediately even after long breaks.
If you do need to recharge the battery, however, not much time will pass. With the quick charge, you can charge it up to 90% (!) in only 6 minutes.
Further advantages of this battery are the high power density and, thanks to the absence of acid, installation in any position. Heavy metals were also not used.
Due to its long life and safety, you can enjoy your lithium-ion battery for a long time to come. This high safety standard is guaranteed by the technology - including a built-in processor ("balancer") for the even charge state of all cells - and the manufacturing process (see Technical Data).

TECHNICAL DATA:
Battery
- Lithium Ion battery from JMT
- Type: VTB-5 V-TWIN
- 12V voltage
- 8Ah capacity (10 hours)
- 96Wh energy output
- 420A Refrigeration test current (measuring method: SAE)
- Dimensions: approx. 17.3 x 9.8 x 15.4 cm (LxWxH)
- Weight ready for operation: 1.0 kg
- Connection type: from front
- Positive pole: front left
Minus pole: front right
- without gas discharge
- Production: Lithium polymer process, cathode material iron phosphate (LiFePO4)
Battery charger
- especially for charging lithium-ion accumulators with iron phosphate cathodes, so-called LiFePO4 accumulators
- LED display (red: battery is charging, green: battery is fully charged)
- Input voltage: AC 100-240 V, 50-60 Hz
- Constant voltage: 14.6 V
- Constant current: 1.0 A
- Dimensions of the connector part: approx. 80x53x34 mm
- Length of the battery terminals: approx. 80 mm
- max. opening width of the battery terminals (max. diameter of the battery poles): approx. 28 mm
- Material (cover): Plastic

IMPORTANT NOTES:
- To prevent the battery and charger from overheating, they must not be covered.
- This charger is only suitable for Li-Ion batteries.
- Please note that only suitable chargers may be used for charging.
- The maximum charging voltage of 14.6 volts must never be exceeded. There is a risk of explosion.
- With the aid of adapters, the dimensions of the lithium-ion batteries correspond to the dimensions of the original lead-acid batteries. The connections are also identical, which means that the battery can be replaced in a few minutes without further adjustments.

IMPORTANT INFORMATION FOR END USERS:
Batteries must not be disposed of with household waste. As an end user you are legally obliged to return used batteries. Batteries can be returned free of charge after use in a retail shop. In connection with the sale of vehicle batteries to end users, we are additionally obligated under § 10 BattG to charge a deposit of € 7.50 including VAT per vehicle battery if the end user does not return a used vehicle battery at the time of purchase of a new vehicle battery. We are obliged to refund the deposit after the deposit has been levied if you return a used vehicle battery to us (ZS 2radteile GmbH, Unterbibracher Str. 3, 95519 Vorbach). In addition, we are obliged to refund the deposit if you have returned a used vehicle battery to another distributor of vehicle batteries, to a public waste disposal company or to an operator of a treatment facility for used vehicles in accordance with the End-of-Life Vehicles Ordinance (Ordinance on the Surrender, Return and Environmentally Sound Disposal of End-of-Life Vehicles) and provide us with written or electronic proof of return which is not older than two weeks at the time of presentation. If you belong to a commercial or other economic enterprise or are a public institution, you also have the option of disposing of the vehicle battery directly with manufacturers of vehicle batteries or with commercial waste battery disposal companies; in this case, you will also receive the deposit back from us after presenting a written or electronic proof of return from these bodies, which is not older than two weeks at the time of presentation.

SCOPE OF DELIVERY:
✔ 1x battery
✔ 1x charger